Characteristics of EASEIC company production: * Environmental protection * Trustiness * Economy
EASEIC electronic ballast series products applicable to fluorescent lamp series lamp-house and high voltage discharge lamp series lamp-house are as follows:
Non-dimmable ballast series for fluorescent lamp * Standard electronic ballasts for fluorescent lamps * Professional electronic ballasts for fluorescent lamps
Dimmable ballast series for fluorescent lamp * 0/1-10V interface dimmable electronic ballasts for fluorescent lamps * DALI dimmable electronic ballasts for fluorescent lamps
Electronic ballasts series for HID lamp * Professional electronic ballasts for HID lamps
Standard electronic ballast series products, whole electronic structure, Zero noise, light weight, active power factor adjustment high power >0.98, use digital warm-up, zero flicker startup. The work frequency is large than 40-120KHz, so that is would not cause infrared ray remote device(36KHz) interfere. Our company is adopting high frequency work fluorescent lamp, which increases 10% of the luminous flux than working in 50Hz work frequency, without frequency flash effect, can effectively protect the eyesight.
Professional electronic ballast series products, universal input voltage, the voltage input range is 95-305VAC. Perfect lamp life and lamp damage protection can effectively solve the problem of the lamp tube suddenly and continually flicker caused by the imbalance waste of filament pole, which damage the ballast or lamp holder. This product can automatically supervise lamp tube work condition. When lamp tube life is ended or damaged, this product can immediately close it, insure safety and automatically renew work after replacing new lamp tube.
Dimmable electronic ballast series products, fluorescent lamps dimming range 1%-100%, high voltage discharge lamp dimming range is 50%-100% (can customize the dimming range and the dimming time). No flicker in the whole dimmable range and stably startup without flicker during adjusting light degree, and with low self energy consumption(<10% of the light power), the energy consumption and bright degree is direct ratio. It offers low operational cost, standard 0/1-10V analog signals dimmable control interface and comfortable lighting effect while installing “four lines system” very conveniently.
With 0/1-10V analog signals dimmable control interface dimmable electronic ballast makes the light intensity more simply and easily control. Addressable dimmable electronic ballast series products, Universal input voltage, the voltage input range is 95-305VAC. It can ensure power output invariableness, which is the lamp output being maintained in a rating value, ensure the lighting effectivity. Fluorescent lamp dimmable range is 1-100%, high voltage discharge lamp dimmable range is 50%-100% (can customize the dimming range and the dimming time).Work frequency is 40-120KHz, with comfortably adjusting light, protect eye, which is totally accord with DALI(digital addressable lighting interface) protocol, offer new intelligentized DALI control interface, switch by digital signal control or by main electrical source. The work characteristic is programmable control, and return to current working condition, error and failure to control system. Using it with DALI main controller, it can fulfill point to point control.
EASEIC dimmable electronic ballasts series products with DALI interface make the lighting control more intelligentized and comfortable.
